Nanostation                                      
** 5/1/25   Ubiquiti  
      Nanostation  
                                         
   
  UniF Network Setting up nanostation-M2 as a Wireless Receiver
  NotesUniFi Network
  AP 1 Connect PC to nano                      
  Nanostation  Nano defaults:   TCP/IP properties of the PC
  NanoTabs 192.168.1.20 IP address 192.168.1.73
  ERL3notes user ubnt Subnet Mask 255.255.255.0
  ERL3setup psswd ubnt Default Gateway 192.168.1.20
  YouTube           Preferred DNS server   192.168.1.20
  FileLocations
  Glossary ( power + network cable LEDs should be lit on the Nanostation. )
  SignalStrength
    First Time Login >>>> Change username/password   >>>>      
      System  
   
    Administrator User Name:     BossHogg click on the "key" icon to change password
    Current Password: ubnt
    New Password: @00
    Verify New Password: @00
    Read-Only Account:     enable
   
   
    Change Apply
   
    2 Setting up the Nano                    
   
    Open a browser and login to the Nano
   
      Network   see Nano_Tabs for the Network settings
   
    click on  Change but DO NOT APPLY yet !
   
   
      Advanced   see Nano_Tabs for the Advanced settings
    change LED thresholds if desired
   
    click on  Change but DO NOT APPLY yet !
       (if you made changes to the LED thresholds)
   
   
      Wireless   see Nano_Tabs for the Wireless settings
   
    click on  Change
    click on  Apply Nano will reboot to new settings
   
    re-connect PC to Nano  Nano defaults:   TCP/IP properties of the PC
    ( new settings ) 192.168.10.1 IP address 192.168.10.73
    user newuser Subnet Mask 255.255.255.0
    psswd newpass Default Gateway 192.168.10.1
              Preferred DNS server   192.168.10.1
   
    or TCP/IP properties of the PC
       
     X  Obtain an IP address automatically
     X Obtain DNS server address automatically
             
   
    3 Connecting to a WIFI                    
   
      Wireless   see Nano_Tabs for the Wireless settings
   
    Select desired SSID
    Udate the wireless security settings
   
    click on  Change
    click on  Apply
   
    To verify the connection, click on the Main tab.
      Main   This page has no settings, only info to confirm a connection.
       (You may have to refresh the browser to get current info).
    Tools:  
    Align antenna Brings up a received signal strength indicator.
    Useful for improving signals by rotating the Nanostation.