How_To's                                                        
***   unRAID                                
  Ver   How_To's                                
  1/31/24                                                        
                 
  Index 1 Autostart Settings > System Settings > Disk Settings > Enable auto start: Yes No Apply 1 Autostart          
  info 2 Backing up the Flash drive    
  How_To's Note 3 How to upgrade a Data Drive in UnRaid  
  Plugins 2 Backing up the Flash drive Main > Boot Device >  click on " @ Flash" This PC:\C:\Users\User1\Downloads click on the chrome  4 Server Disk Swap: How to Easily Replace a Failed Drive!
  SpaceInvader_One Flash Device Settings:  ---> Flash Backup E:\Backups\unRAID     download arrow (upper left) 5 How to Plan and Build a NAS Home Server  
  snippets M:\Backups B B B B B B\unRAID corner and click on "keep". 6 Parity Swapping        
  Snapshots 7 Move data from "My_NAS" to "Plex-Media".  
    3 How to upgrade a Data Drive in UNRAID Z Tech https://www.youtube.com/watch?v=tsv9DkwG_JM&t=807s 8 How to add additional storage (disks) to UnRAID
    9 Adding a drive to UnRAID 6    
                 
    8:47 Main >  Array Operation >   Stop              
                 
    Shutdown Open case, swap out Hard Drive              
    Power up the NAS              
                 
   
    Main >  Arrar Devices > Select device, click on dropdown, pick your new drive.
   
   
   
    4 Unraid Server Disk Swap: How to Easily Replace a Failed Drive! Elevated Systems https://www.youtube.com/watch?v=Oa_3FApcxAs&t=29s
   
   
    5 How To Plan and Build a NAS Home Server. Elevated Systems https://www.youtube.com/watch?v=dK_ImhC80Yo&t=0s
   
   
    6 Parity Swapping   https://www.youtube.com/watch?v=NM5phUqZxyE
   
    0:01:00 A:  Single, Dual, Single Swap Takes a long time, minimal down time.
    0:02:32 B:  Offline Swap Keeps parity protection, but requires the array to be shut down
    0:04:00 C:  Parity to Data Drive Swap for replacing a failing drive with a disk larger than the current parity
    0:06:45 D:  Yolo Swapping just switching it without much thought. (keeps array online, but 
    removes the parity protection till the process is done.)
   
    B: Offline Swap
    Stop array
    select new parity over the existing parity
    start array in Maint Mode (X)
    sync
   
    C: Parity to Data Drive Swap
    ( Array is stopped )
    0:04:40 First, remove the failing data drive. ( put data disk in unassigned mode )
    Then start the array and stop it right after. 
    Now remove the old parity drive. ( put parity disk in unassigned mode )
    and put it in the "failed" disks location. ( assign the "partiy" disk to the "data" disk location )
   
    Put  the new bigger drive as the new parity ( assign the "new bigger" disk to the "parity" disk location )
   
    0:05:41 We can now see a "Copy" Selection.  We can check the "Yes I want to do this"   Copy X Yes, I want to do this
    click on copy,  The array will now copy the data from  the old parity drive to the new parity.  (This can take many hours)
    During this process we cannot access the drives. Once the copy has finished the array  
    will be automatically stopped We can now start the array up again. Start
    The rebuild of the "new data disk" is now starting. During  this process we can already access our data again. (Can again take many hours)
    Once the rebuild is complete  we have finish the Procedure
   
   
   
   
    7 Move data from "My_NAS" to "Plex-Media".
   
    Shares > User Shares >  -> isos Click on the "square with arrow" to browse that share.
    -> My_NAS ie mv /mnt/user/My_NAS/My_Pictures    /mnt/user/Plex-Media/Pictures
    -> Plex-Media My_Pictures  --->     Pictures/My_Pictures
   
   
   
    8 How to add additional storage (disks) to UnRAID The Bear Tech https://www.youtube.com/watch?v=vvgNAS-hZBg
   
    0:11:24 should see the newly installed drive as an unassigned device.
    0:11:46 stop the arrary and format the new drive
    0:12:20 clear the disk (click on the little red X ) pop-up window >> Yes  -->  remove
    once that's done the option to format the drive is enabled
    0:12:39 Format  >>>> pop-up window >>   choose File System >> xfs Next yes Format
   
    0:12:50 add the disk to the data array
   
   
    9 Adding a drive to UnRAID 6     Mike Fury Tech https://www.youtube.com/watch?v=byv4kP4UkE0
   
    0:02:06 1st Run pre-clear on the drive. Plugins > Preclear or Tools > Preclear
   
    2nd Add drive to array. Main > Stop arrary
    assign new drive to a unassigned disk slot
    Main > Start array
   
    3rd Main > Array Operation > Unmountable disk present: X yes I want to do this. Format