Helix7

***

Fishing

Ver

Helix7

1/18/24

Conv Chart

Menu-Menu >

Alarms Menu

Sonar Menu

Nav Menu

Chart Menu

HB Chart Menu

Setup Menu

Views

Accessories

Lakes

Depth Alarm

2D SwithcFire

Current Track

Map Source

AutoChart

Langage

Screen Snapshot Waypoint

Fish

Fish ID Alarm

2D Contrast

Waypoints, Routes, Tracks

Chart Orientation

Spot Suundings

Units - Depth

JR's_Corner

Lows Battery Alarm

Fish ID +

Waypoint Settings Icons

Text Size

Shallow Water Highlight

Units - Temp

Upper Red Lake

Off Course Alarm

Fish ID Sensitivity

Saved Tracks Defaults

Symbol Size

Shallow Water Highlight

Units - Distance

Fish_Finders

Arrival alarm

Fish ID Alarm

Casting Rings

North Reference

Highlight 1

Units - Speed

Helix7

Drift Alarm

Zoom Width

Waypoint Proximity Flags

North Up Indicator

Highlight 1 Min

User Mode

Notes

Aalrm Tone

Depth Lines

Waypoint Decluttering On or Off

Auto Zoom

Highlight 1 Max

Triplog Reset

Timer Setup

Frequency Label

Trolling Grid Rotation

Auto Range

Water Level Offset

Restore Defaults

Start Timer

Noise Filter

Trackpoint Interval

Vessel Offset

Format Nav Directories

Max Depth

Track Min Distance

Offset Speed

Digital Readouts

Water Type

Course Projection Line

Depth Offset

Connected Transducer

Continuous Navigation Mode

Local Time Zone

Color Bar

GPS Receiver Override

Daylight Saving Time

Go to Open Water

Position Format

GPS Output

GPS GLONASS

View button >

Press and Hold >

to Open the Views X-Press Menu

Time Format

Date Format

Views

Sonar

Chart

System

Digits Format

Flasher View

Chart View

Sysetm Status

------>

Serial #

221027010452

NMEA 0183 Output

Flasher / 2D View

Chart / Chart View

GPS Diagnostic View

Model

ICE HELIX 7 CHIRP GPS G4

Configure NMEA Talker ID

Flasher / D Zoom View

Accessory Test

Software Ver

2.930

1/28/2025

Sonar

2D View

Snapshot and Recording View

Hum Base

2.010

CHIRP Configuration

2D Zoom View

Demonstration

Full 2D Zoom View

Sound Control

Big Digits View

Battery Type

View Menus

Menu >

Flasher View

2D View

2D Zoom View

Gain

CHIRP IR

Cone Angle

Declutter

Upper Range

Cone Angle

Lower Range

Upper Range

Show Cursor

Surface Clutter

Lower Range

Reset Bottom Zoom

Flasher Style

Surface Clutter

Lower Range

Sonar Colors

Chart Speed

Surface Clutter

RTS Window

Bottom Lock

RTS Mode

Chart Speed

Sonar Colors

Zoom RTS Window

Zoom RTS Mode

Sonar Colors

Software Updates ->

ICE Series

ICE HELIX 7 CHIRP GPS G4

Important Notes and Prerequisites

HumminbirdPC

Helix 5

NOTICE! To ensure a smooth update process, please keep the unit powered on until the update is fully completed

DO NOT power the unit off during the update.

If you are currently running software version 2.180 or older, you need to install software version 2.320.

You will need a Class 10 Micro SD no larger than 32GB, and 440 MB of available space.

If you are currently running software version 2.280 you need to install software version 2.330.

Head unit software MUST be installed BEFORE installing any accessory software.

The defaults will be restored when 2.930 is installed.

You need to update your Humminbird Basemap once version (2.320 or 2.330) is installed.

Download Instructions

Click the link below to begin downloading the software update file to your computer

ICE HELIX 7 CHIRP GPS G4

Item # 411750-1

Save the .UPD file to your PC and move the .UPD file to your SD card.

M:\Software\Humminbird\

The Humminbird ICE Helix 7 uses a microSD card.

Connect the SD card to your computer and ensure it is detected.

This card slot is used for premium mapping, software updates,

Open File Explorer

or to save screenshots, sonar recordings, and waypoints.

Locate the update file in your Downloads section (see example below)

Cut/copy and paste the desired files from your computer to your SD card.

Control Head Keys

check / Info key

for charts

Once the file has successfully saved on your card, safely disconnect your SD card.

Inserting microSD card

label to front, notches down.

Update Instructions

137

Set up Humminbird LakeMaster

keep the unit powered on until the update is fully completed

remove any other card that may be present, such as a LakeMaster, Zero Lines, Navionics, etc., from the unit before initializing the new update.

157

MOB - Man Overboard

Press and hold the GOTO/MOB key until MOB is activated.

Install the microSD or SD card with the updated software file into the control head card slot.

Power the unit on.

159

Waypoints

2,750 possible

The control head will recognize the new software (recognition may take several minutes) and run through a series of prompts to confirm the software installation.

162

Select a Waypoint in the Chart View

1. You will first be asked if you want to install the displayed version. To continue, answer with "Yes" (RIGHT Cursor key).

163

Edit a Waypoint

on-the-go, Chart View

2. You will then be asked if you want to abort the update in the chance you proceeded by mistake. To proceed with the update, answer "No" (LEFT Cursor Key).

168

Routes

173

Tracks

175

Search The control head must have a separate-purchase map card installed to enable the features in this section.

178

Manage your Navigation Data

User Guide (Google drive)

User Guides (webs)

<---- use Microsoft Edge